• Español
  • English
  • Llámanos +58 212 632 99 11

    Modelo:

    NDP 2180HQF


    • Doble bobina móvil de 3,5″ / diafragma anular
    • Acoplamiento acústico perfecto
    • Eficiencia extremadamente alta
    • Excepcionalmente alta potencia de 400 W (AES)
    • Proporciona 6 dB más de presión sonora que un transductor comparable de bobina móvil única
    • Distorsión ultrabaja
    • Especialmente diseñado para aplicaciones de salida extremadamente alta
    • Montaje con imán de neodimio
    • Peso ultraligero y tamaño reducido

    Caracerísticas


    2500W

    The NDP 2180HQF dual-diaphragm transducer incorporates two identical 3.5″ concentric ring diaphragms connected to a common 2″ throat, providing extremely high acoustic output.

    The patented design of the NDP 2180HQF is the result of extensive research and development, and provides a dramatic improvement in efficiency, power handling, dynamic response and clarity.
    In fact, the dual voice coil/diaphragm assembly provides 6 dB more peak SPL compared to a single voice coil transducer.

     

    Two large annular diaphragms cover the frequency range from 300 Hz to 9000 Hz with a smooth, linear response.
    The high diaphragm excursion of a maximum of +/- 0.8 mm results in high output and increased power handling of up to 2,500 W peak.

     

    The unique voice coil technology employs a high purity copper wire wound inside and outside the Kapton™ die to improve heat dissipation, dramatically increasing acoustic output and transducer reliability while minimizing power compression.
    The use of high-grade neodymium magnets provides improved performance while significantly reducing transducer weight.

    Throat: 2″ (50.8 mm)
    Nominal impedance:  2x 8 Ohm
    Power capacity (AES): 400 W (2 x 200 W above 300 Hz)
    Peak power: 2500 W (2 x 1000 W above 400 Hz)
    Sensitivity 2x1W@1m: 106 dB on a 40°x 20° waveguide
    Frequency range: 300 – 9000 Hz
    Recommended crossover: 250 Hz
    Voice coil: 2x 3.5 ” (2 x 90 mm)
    Magnet material: Neodymium
    Flux density mid-range: 1.95 T
    Voice coil material: Copper (2 layers Inside and outside of the VC)
    Voice coil former: Kapton
    Diaphragm material: Polyester

     

    ND 138

    Driver de compresión Motor de neodimio Rosca de 1 pulgada Potencia maxima...

    Caracerísticas

    800W

    TW1000

    Sistema de Audio Lineal  portátil de 2 vias Amplificador Class D Bi-Amp...

    Caracerísticas

    1000W

    TW 900

    Sistema de Audio Lineal  portátil de 2 vias Amplificador Class D Bi-Amp...

    Caracerísticas

    900W

    A12 BT

    Sistema amplificado Profesional con Batería recargable Amplificador de 600...

    Caracerísticas

    600W